Manufacturing PMI® at 49.1%; September 2025 ISM® Manufacturing PMI® Report

New Orders Contracting; Production Growing; Employment Contracting; Supplier Deliveries Slowing; Raw Materials Inventories Contracting; Customers’ Inventories Too Low; Prices Increasing; Exports and Imports Contracting

TEMPE, Ariz., Oct. 1, 2025 /PRNewswire/ — Economic activity in the manufacturing sector contracted in September for the seventh consecutive month, following a two-month expansion preceded by 26 straight months of contraction, say the nation’s supply executives in the latest ISM^® Manufacturing PMI^® Report.

The report was issued today by Susan Spence, MBA, Chair of the Institute for Supply Management^® (ISM^®) Manufacturing Business Survey Committee.

“The Manufacturing PMI^® registered 49.1 percent in September, a 0.4-percentage point increase compared to the reading of 48.7 percent recorded in August. The overall economy continued in expansion for the 65th month after one month of contraction in April 2020. (A Manufacturing PMI^® above 42.3 percent, over a period of time, generally indicates an expansion of the overall economy.) The New Orders Index contracted in September following one month of growth; the figure of 48.9 percent is 2.5 percentage points lower than the 51.4 percent recorded in August. The September reading of the Production Index (51 percent) is 3.2 percentage points higher than August’s figure of 47.8 percent. The Prices Index remained in expansion (or ‘increasing’ territory), registering 61.9 percent, down 1.8 percentage points compared to the reading of 63.7 percent reported in August. The Backlog of Orders Index registered 46.2 percent, up 1.5 percentage points compared to the 44.7 percent recorded in August. The Employment Index registered 45.3 percent, up 1.5 percentage points from August’s figure of 43.8 percent.

“The Supplier Deliveries Index indicated slower delivery performance for the second consecutive month after one month in ‘faster’ territory, which was preceded by seven consecutive months in ‘slower’ territory. The reading of 52.6 percent is up 1.3 percentage points from the 51.3 percent recorded in August. (Supplier Deliveries is the only ISM^® PMI^® Reports index that is inversed; a reading of above 50 percent indicates slower deliveries, which is typical as the economy improves and customer demand increases.) The Inventories Index registered 47.7 percent, down 1.7 percentage points compared to August’s reading of 49.4 percent.

“The New Export Orders Index reading of 43 percent is 4.6 percentage points lower than the reading of 47.6 percent registered in August. The Imports Index registered 44.7 percent, 1.3 percentage points lower or than August’s reading of 46 percent.”

Spence continues, “In September, U.S. manufacturing activity contracted at a slightly slower rate, with production growth the biggest factor in the 0.4-percentage point gain of the Manufacturing PMI^®. However, the combined drops in the New Orders and Inventories indexes (4.2 percentage points) exceeded the increase in the Production Index (3.2), rendering the Manufacturing PMI^® improvement negligible. Last month’s increase in new orders (an index gain of 4.3 percentage points from July to August) seems to have flowed through to production but does not appear to be sustainable given the subsequent drop in new orders in September.

“One of the four demand indicators improved, with the Backlog of Orders Index showing a gain of 1.5 percentage points (which could be due to August’s increase in new orders, cited above), while the New Orders, New Export Orders and Customers’ Inventories indexes contracted at faster rates. A ‘too low’ status for the Customers’ Inventories Index is usually considered positive for future production.

“Regarding output, the Production and Employment indexes improved, though 64 percent of panelists’ comments still indicated that managing head count is still the norm at their companies, as opposed to hiring.

“Finally, inputs (defined as supplier deliveries, inventories, prices and imports), on net, moved further into contraction territory. The Supplier Deliveries Index indicated slower deliveries, the Inventories Index worsened, and the Prices Index continued to increase, but at a slower rate. The Imports Index moved further into contraction.

“Looking at the manufacturing economy, 67 percent of the sector’s gross domestic product (GDP) contracted in September, down from 69 percent in August. Twenty-eight percent of GDP is strongly contracting (registering a composite PMI^® of 45 percent or lower), up from 4 percent in August. The share of sector GDP with a PMI^® at or below 45 percent is a good metric to gauge overall manufacturing weakness. Of the six largest manufacturing industries, only one (Petroleum & Coal Products) expanded in September, compared to two in August,” says Spence.

The five manufacturing industries reporting growth in September are: Petroleum & Coal Products; Primary Metals; Textile Mills; Fabricated Metal Products; and Miscellaneous Manufacturing. The 11 industries reporting contraction in September — in the following order — are: Wood Products; Apparel, Leather & Allied Products; Plastics & Rubber Products; Paper Products; Furniture & Related Products; Chemical Products; Electrical Equipment, Appliances & Components; Transportation Equipment; Nonmetallic Mineral Products; Machinery; and Computer & Electronic Products.

WHAT RESPONDENTS ARE SAYING

• “Business continues to be severely depressed. Profits are down and extreme taxes (tariffs) are being shouldered by all companies in our space. We have increased price pressures both to our inputs and customer outputs as companies are starting to pass on tariffs via surcharges, raising prices up to 20 percent. The addition of the derivative steel and aluminum tariffs in the middle of the month — with no announcement — was devastating. Interest-rate lowering or the ‘One Big Beautiful Bill’ will not impact our business, as all capital projects are on hold until there is some level of certainty and customers start to place orders for new equipment again. We believe we are in a stagflation period where prices are up but orders are down due to tariff policy, and again, customers are not willing to pay the higher prices, so they are just not buying. Continuing to find ways to reduce overhead, which means letting go of experienced workers.” (Transportation Equipment)
• “The tariffs are still causing issues with imported goods into the U.S. In addition to the cost concerns, product is being held up at borders due to documentation issues. The inflation issues continue; low volumes are a constant concern. The European region is not improving as we had expected, causing further concern for long-term business viability.” (Chemical Products)
• “Ongoing macroeconomic conditions highlighted by interest-rate management and tariffs continue to impact customer purchasing decisions, resulting in subdued production rates and growing cost concerns on direct material and operations.” (Machinery)
• “Lead times have slightly normalized, but tariffs continue to drive additional spend.” (Petroleum & Coal Products)
• “Customer orders are depressed for heavy machinery because tariffs are so impactful to high-end capital equipment. Revenue expectations are flat for the rest of 2025, with no outlook to improve in 2026.” (Electrical Equipment, Appliances & Components)
• “Current business conditions remain volatile, with geopolitical tensions, weather disruptions and shifting trade policies driving uncertainty in agricultural commodities. Oils remain sensitive to biofuel demand and global production. Inflation and evolving consumer trends add further complexity. To manage this, we are emphasizing supplier diversification, long-term contracts and formula-based pricing to balance cost stability with flexibility.” (Food, Beverage & Tobacco Products)
• “The semiconductor industry is being impacted by high tariff prices on parts from Korea, China and Europe. Our industry is at a low point right now as we race to get new nanotechnology in the U.S.” (Computer & Electronic Products)
• “Business is slowing down. Order books are softening as customers push orders out. Seems to be stemming from concerns about the direction of the U.S. economy.” (Plastics & Rubber Products)
• “Tariffs still affecting vast amounts of increases in hardware, Al (artificial intelligence) and stainless steel. MRO (maintenance, repair and operating) products have continually increased, and the slowdown in agriculture has had stark impacts on bottom lines for raw materials.” (Fabricated Metal Products)
• “Steel tariffs are killing us.” (Miscellaneous Manufacturing)

ISM ^®  Manufacturing PMI ^®  Report data is seasonally adjusted for the New Orders, Production, Employment and Inventories indexes. 
*Number of months moving in current direction.

COMMODITIES REPORTED UP/DOWN IN PRICE AND IN SHORT SUPPLY

Commodities Up in Price
Aluminum (22); Copper (3); Copper Products (3); Corn; Corrugate; Electrical Components (8); Electronic Components; Metal Based Products; Steel* (8); Steel — Stainless (7); and Steel Products (7).

Commodities Down in Price
Polypropylene Resin; and Steel* (2).

Commodities in Short Supply
Electrical Components (3); Electronic Components (7), Labor; Rare Earth Magnets; and Semiconductors.

Note: The number of consecutive months the commodity is listed is indicated after each item.
*Indicates both up and down in price.

SEPTEMBER 2025 MANUFACTURING INDEX SUMMARIES

Manufacturing PMI ^®

The U.S. manufacturing sector contracted in September for the seventh consecutive month after two months of expansion preceded by 26 months of contraction. “The Manufacturing PMI^® registered 49.1 percent in September, a 0.4-percentage point increase compared to the 48.7 percent recorded in August. Of the five subindexes that directly factor into the Manufacturing PMI^®, two (Production and Supplier Deliveries) are in expansion territory, the same number as in August. After one month in contraction territory, the Production Index gained 3.2 percentage points, putting it back in expansion. New Orders returned to contraction, the Employment Index increased but remains in contraction territory, and the Inventories Index had a faster rate of contraction. Only one of the six biggest manufacturing industries (Petroleum & Coal Products) registered growth in September,” says Spence. A reading above 50 percent indicates that the manufacturing sector is generally expanding; below 50 percent indicates that it is generally contracting.

A Manufacturing PMI^® above 42.3 percent, over a period of time, generally indicates an expansion of the overall economy. Therefore, the September Manufacturing PMI^® indicates the overall economy grew for the 65th straight month after contracting in April 2020. “The past relationship between the Manufacturing PMI^® and the overall economy indicates that the September reading (49.1 percent) corresponds to a change of plus 1.9 percent in real gross domestic product (GDP) on an annualized basis,” says Spence.

THE LAST 12 MONTHS

New Orders
ISM^®‘s New Orders Index contracted in September after one month in expansion, registering 48.9 percent, a decrease of 2.5 percentage points compared to August’s figure of 51.4 percent. This reading is below the 12-month moving average (49 percent) for the New Orders Index, which hasn’t indicated consistent growth since a 24-month streak of expansion ended in May 2022. “Of the six largest manufacturing sectors, none reported increased new orders. For every positive comment about new orders, there were 1.6 comments expressing concern about near-term demand, primarily driven by tariff costs and uncertainty,” says Spence. A New Orders Index above 52.1 percent, over time, is generally consistent with an increase in the Census Bureau’s series on manufacturing orders (in constant 2000 dollars).

The six manufacturing industries that reported growth in new orders in September — in the following order — are: Textile Mills; Furniture & Related Products; Fabricated Metal Products; Miscellaneous Manufacturing; Primary Metals; and Electrical Equipment, Appliances & Components. The nine industries reporting a decline in new orders in September, in order, are: Wood Products; Nonmetallic Mineral Products; Plastics & Rubber Products; Paper Products; Transportation Equipment; Computer & Electronic Products; Machinery; Food, Beverage & Tobacco Products; and Chemical Products.

Production
The Production Index expanded in September, registering 51 percent, 3.2 percentage points higher than the August reading of 47.8 percent. “Of the six largest manufacturing sectors, four (Petroleum & Coal Products; Food, Beverage & Tobacco Products; Computer & Electronic Products; and Machinery) reported increased production. Panelists had a 1-to-2 ratio of positive to negative comments regarding output,” says Spence. An index above 52.1 percent, over time, is generally consistent with an increase in the Federal Reserve Board’s Industrial Production figures.

The eight industries reporting growth in production during the month of September — in the following order — are: Textile Mills; Petroleum & Coal Products; Primary Metals; Miscellaneous Manufacturing; Food, Beverage & Tobacco Products; Fabricated Metal Products; Computer & Electronic Products; and Machinery. The six industries reporting a decrease in production in September, in order, are: Electrical Equipment, Appliances & Components; Wood Products; Paper Products; Nonmetallic Mineral Products; Chemical Products; and Transportation Equipment.

Employment
ISM^®‘s Employment Index registered 45.3 percent in September, 1.5 percentage points higher than August’s reading of 43.8 percent. “The index posted its eighth consecutive month of contraction after expanding in January, with seven straight months of contraction before that. Since May 2022, the Employment Index has contracted in 34 of 41 months. Of the six big manufacturing sectors, none reported higher levels of employment in September. For every comment on hiring, there were three on reducing head counts as companies continued to focus on accelerating staff reductions due to uncertain near- to mid-term demand. Layoffs and not filling open positions remain the main head-count management strategies,” says Spence. An Employment Index above 50.3 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) data on manufacturing employment.

Of the 18 manufacturing industries, one reported employment growth in September: Nonmetallic Mineral Products. The 14 industries reporting a decrease in employment in September, in the following order, are: Wood Products; Furniture & Related Products; Textile Mills; Electrical Equipment, Appliances & Components; Plastics & Rubber Products; Computer & Electronic Products; Paper Products; Chemical Products; Transportation Equipment; Food, Beverage & Tobacco Products; Primary Metals; Machinery; Miscellaneous Manufacturing; and Fabricated Metal Products.

Supplier Deliveries^†
For the second consecutive month, delivery performance of suppliers to manufacturing organizations was slower in September, after one month of faster deliveries preceded by seven months of index readings in “slowing” territory. The Supplier Deliveries Index registered 52.6 percent, a 1.3-percentage point increase compared to the reading of 51.3 percent reported in August. Of the six big industries, four (Computer & Electronic Products; Food, Beverage & Tobacco Products; Machinery; and Chemical Products) reported slower supplier deliveries. A reading below 50 percent indicates faster deliveries, while a reading above 50 percent indicates slower deliveries.

The nine manufacturing industries reporting slower supplier deliveries in September — in the following order — are: Textile Mills; Wood Products; Computer & Electronic Products; Primary Metals; Nonmetallic Mineral Products; Food, Beverage & Tobacco Products; Machinery; Fabricated Metal Products; and Chemical Products. The four industries reporting faster supplier deliveries in September are: Paper Products; Miscellaneous Manufacturing; Electrical Equipment, Appliances & Components; and Transportation Equipment.

Inventories
The Inventories Index registered 47.7 percent in September, down 1.7 percentage points compared to the reading of 49.4 percent in August. “Of the six big industries, two (Petroleum & Coal Products and Transportation Equipment) expanded in September,” says Spence. An Inventories Index greater than 44.5 percent, over time, is generally consistent with expansion in the Bureau of Economic Analysis (BEA) figures on overall manufacturing inventories (in chained 2000 dollars).

Of 18 manufacturing industries, the seven reporting higher inventories in September — listed in order — are: Petroleum & Coal Products; Miscellaneous Manufacturing; Paper Products; Electrical Equipment, Appliances & Components; Primary Metals; Transportation Equipment; and Fabricated Metal Products. The nine industries reporting lower inventories in September — listed in order — are: Apparel, Leather & Allied Products; Furniture & Related Products; Textile Mills; Plastics & Rubber Products; Wood Products; Chemical Products; Machinery; Nonmetallic Mineral Products; and Computer & Electronic Products.

Customers’ Inventories^†
ISM^®‘s Customers’ Inventories Index remained in “too low” territory in September, with a reading of 43.7 percent, a decrease of 0.9 percentage point compared to the reading of 44.6 percent in August. “Customers’ inventory levels in September continued to contract and move further from ‘about right’ territory,” says Spence. (For more information about the Customers’ Inventories Index, see the “Data and Method of Presentation” section below.)

The three industries reporting customers’ inventories as too high in September are: Plastics & Rubber Products; Miscellaneous Manufacturing; and Machinery. The 10 industries reporting customers’ inventories as too low in September, in order, are: Fabricated Metal Products; Chemical Products; Furniture & Related Products; Nonmetallic Mineral Products; Food, Beverage & Tobacco Products; Electrical Equipment, Appliances & Components; Primary Metals; Transportation Equipment; Wood Products; and Paper Products.

Prices^†
The ISM^® Prices Index registered 61.9 percent in September, decreasing 1.8 percentage points compared to the previous month’s reading of 63.7 percent, indicating raw materials prices increased for the 12th straight month (though at a slower rate compared to August). The Prices Index has increased 11.6 percentage points over the past 11 months. In the last eight months, the index reached its highest levels since June 2022, when it registered 78.5 percent. All of the six largest manufacturing industries — Machinery; Computer & Electronic Products; Food, Beverage & Tobacco Products; Petroleum & Coal Products; Transportation Equipment; and Chemical Products, in that order — reported price increases in September. “The Prices Index reading continues to be driven by increases in steel and aluminum prices that impact the entire value chain, as well as tariffs applied to many imported goods. Higher prices were reported by 32.5 percent of respondents in September, down from 33.5 percent in August. The share of respondents reporting higher prices trended up from November 2024 (12.2 percent) to April (49.2 percent), which was the highest level since June 2022 (65.2 percent),” says Spence. A Prices Index above 52.8 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) Producer Price Index for Intermediate Materials.

In September, the 13 industries that reported paying increased prices for raw materials, in order, are: Textile Mills; Wood Products; Primary Metals; Machinery; Computer & Electronic Products; Electrical Equipment, Appliances & Components; Miscellaneous Manufacturing; Food, Beverage & Tobacco Products; Petroleum & Coal Products; Fabricated Metal Products; Nonmetallic Mineral Products; Transportation Equipment; and Chemical Products. The only industry that reported paying decreased prices for raw materials in September is Plastics & Rubber Products.

Backlog of Orders^†
ISM^®‘s Backlog of Orders Index registered 46.2 percent, an increase of 1.5 percentage points compared to the August reading of 44.7 percent, indicating order backlogs contracted for the 36th consecutive month after a 27-month period of expansion that ended September 2022. Of the six largest manufacturing industries, one reported expansion in order backlogs in September (Transportation Equipment). “Ongoing contraction in the Backlog of Orders index still means that trade issues and other geopolitical tensions are still at play. Significant improvement shouldn’t be expected until those issues begin to recede,” says Spence.

Of the 18 manufacturing industries, the four that reported growth in order backlogs in September are: Wood Products; Transportation Equipment; Fabricated Metal Products; and Miscellaneous Manufacturing. The 10 industries reporting lower backlogs in September — in the following order — are: Textile Mills; Paper Products; Plastics & Rubber Products; Computer & Electronic Products; Nonmetallic Mineral Products; Food, Beverage & Tobacco Products; Electrical Equipment, Appliances & Components; Machinery; Chemical Products; and Primary Metals.

New Export Orders^†
ISM^®‘s New Export Orders Index contracted in September, registering 43 percent, down 4.6 percentage points from August’s reading of 47.6 percent. “Export orders contracted for the seventh consecutive month after growing in January and February. That brief period of expansion followed an ‘unchanged’ status (a reading of 50 percent) in December, preceded by six straight months of contraction. Ongoing trade friction is still resulting in dampened demand, as witnessed by the 60 percent of panelists’ comments citing soft demand due to tariffs and uncertain U.S. economic policy,” says Spence.

Of the 18 manufacturing industries, none reported growth in new export orders in September. The 10 industries that reported a decrease in new export orders in September — in the following order — are: Plastics & Rubber Products; Fabricated Metal Products; Paper Products; Primary Metals; Electrical Equipment, Appliances & Components; Chemical Products; Transportation Equipment; Miscellaneous Manufacturing; Computer & Electronic Products; and Machinery. Seven industries reported no change in new export orders in September.

Imports^†
ISM^®‘s Imports Index remained in contraction for the sixth month in September after expanding for three straight months. The September figure of 44.7 percent is a decrease of 1.3 percentage points compared to the reading of 46 percent reported in August. “Imports are contracting at a faster rate, indicating lower levels of demand due to tariff pricing,” says Spence.

No industry reported an increase in import volumes in September. The 10 industries that reported lower volumes of imports in September— in the following order — are: Wood Products; Furniture & Related Products; Electrical Equipment, Appliances & Components; Transportation Equipment; Machinery; Chemical Products; Plastics & Rubber Products; Miscellaneous Manufacturing; Computer & Electronic Products; and Food, Beverage & Tobacco Products. Eight industries reported no change in imports.

^†The Supplier Deliveries, Customers’ Inventories, Prices, Backlog of Orders, New Export Orders, and Imports indexes do not meet the accepted criteria for seasonal adjustments.

Buying Policy
The average commitment lead time for Capital Expenditures in September was 170 days, a decrease of 3 days since August. The average lead time in September for Production Materials was 81 days, a decrease of three days compared to August. The average lead time for Maintenance, Repair and Operating (MRO) Supplies was 49 days, an increase of one day compared to August.

About This Report
DO NOT CONFUSE THIS NATIONAL REPORT with the various regional purchasing reports released across the country. The national report’s information reflects the entire U.S., while the regional reports contain primarily regional data from their local vicinities. Also, the information in the regional reports is not used in calculating the results of the national report. The information compiled in this report is for the month of September 2025.

The data presented herein is obtained from a survey of manufacturing supply executives based on information they have collected within their respective organizations. ISM^® makes no representation, other than that stated within this release, regarding the individual company data collection procedures. The data should be compared to all other economic data sources when used in decision-making.

Data and Method of Presentation
The ISM^®Manufacturing PMI^® Report is based on data compiled from purchasing and supply executives nationwide. The composition of the Manufacturing Business Survey Panel is stratified according to the North American Industry Classification System (NAICS) and each of the following NAICS-based industries’ contribution to gross domestic product (GDP): Food, Beverage & Tobacco Products; Textile Mills; Apparel, Leather & Allied Products; Wood Products; Paper Products; Printing & Related Support Activities; Petroleum & Coal Products; Chemical Products; Plastics & Rubber Products; Nonmetallic Mineral Products; Primary Metals; Fabricated Metal Products; Machinery; Computer & Electronic Products; Electrical Equipment, Appliances & Components; Transportation Equipment; Furniture & Related Products; and Miscellaneous Manufacturing (products such as medical equipment and supplies, jewelry, sporting goods, toys and office supplies). The data are weighted based on each industry’s contribution to GDP. According to U.S. Bureau of Economic Analysis (BEA) estimates (the average of the fourth quarter 2023 GDP estimate and the GDP estimates for first, second, and third quarter 2024, as released on December 19, 2024), the six largest manufacturing industries are: Chemical Products; Transportation Equipment; Computer & Electronic Products; Food, Beverage & Tobacco Products; Machinery; and Petroleum & Coal Products.

Survey responses reflect the change, if any, in the current month compared to the previous month. For nine indicators (New Orders, Backlog of Orders, New Export Orders, Imports, Production, Supplier Deliveries, Inventories, Employment, and Prices), this report shows the percentage reporting each response, the net difference between the number of responses in the positive economic direction (higher, better and slower for Supplier Deliveries) and the negative economic direction (lower, worse and faster for Supplier Deliveries), and the diffusion index. For Customers’ Inventories, respondents report their assessment of their customers’ stock levels of respondent companies’ products this month (rather than last month): too high, about right, and too low. Responses are raw data and are never changed. The diffusion index includes the percent of positive responses plus one-half of those responding the same (considered positive).

The resulting single index number for those meeting the criteria for seasonal adjustments (Manufacturing PMI^®, New Orders, Production, Employment and Inventories) is then seasonally adjusted to allow for the effects of repetitive intra-year variations resulting primarily from normal differences in weather conditions, various institutional arrangements, and differences attributable to non-moveable holidays. All seasonal adjustment factors are subject annually to relatively minor changes when conditions warrant them. The Manufacturing PMI^® is a composite index based on the diffusion indexes of five of the indexes with equal weights: New Orders (seasonally adjusted), Production (seasonally adjusted), Employment (seasonally adjusted), Supplier Deliveries, and Inventories (seasonally adjusted).

Diffusion indexes have the properties of leading indicators and are convenient summary measures showing the prevailing direction of change and the scope of change. A Manufacturing PMI^® reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50 percent indicates that it is generally declining. A Manufacturing PMI^® above 42.3 percent, over a period of time, indicates that the overall economy, or gross domestic product (GDP), is generally expanding; below 42.3 percent, it is generally declining. The distance from 50 percent or 42.3 percent is indicative of the extent of the expansion or decline. With some of the indicators within this report, ISM^® has indicated the departure point between expansion and decline of comparable government series, as determined by regression analysis. For the Customers’ Inventories Index, numerically, a reading: above 50 percent is “too high,” equal to 50 percent is “about right,” and below 50 percent is “too low.” However, in practice and in the context of other data, customers’ inventories may be considered to be “about right” if the diffusion index is between 52 percent (the high side of about right) and 48 percent (the low side of about right).

The ISM^® ManufacturingPMI^® Report survey is sent out to Manufacturing Business Survey Panel respondents the first part of each month. Respondents are asked to report on information for the current month for U.S. operations only. ISM^® receives survey responses throughout most of any given month, with the majority of respondents generally waiting until late in the month to submit responses to give the most accurate picture of current business activity. ISM^® then compiles the report for release on the first business day of the following month.

The industries reporting growth, as indicated in the ISM^® ManufacturingPMI^® Report, are listed in the order of most growth to least growth. For the industries reporting contraction or decreases, those are listed in the order of the highest level of contraction/decrease to the least level of contraction/decrease.

Responses to Buying Policy reflect the percent reporting the current month’s lead time, the approximate weighted number of days ahead for which commitments are made for Capital Expenditures; Production Materials; and Maintenance, Repair and Operating (MRO) Supplies, expressed as hand-to-mouth (five days), 30 days, 60 days, 90 days, six months (180 days), a year or more (360 days), and the weighted average number of days. These responses are raw data, never revised, and not seasonally adjusted.

ISM PMI^® Content
The Institute for Supply Management^® (“ISM^®“) PMI^® Reports, formerly Report On Business^®, (Manufacturing, Services, and Hospital reports) (“ISM PMI^®“) contain information, text, files, images, video, sounds, musical works, works of authorship, applications, and any other materials or content (collectively, “Content”) of ISM (“ISM PMI^® Content”). ISM PMI^® Content is protected by copyright, trademark, trade secret, and other laws, and as between you and ISM, ISM owns and retains all rights in the ISM PMI^® Content. ISM hereby grants you a limited, revocable, nonsublicensable license to access and display on your individual device the ISM PMI^® Content (excluding any software code) solely for your personal, non-commercial use. The ISM PMI^® Content shall also contain Content of users and other ISM licensors. Except as provided herein or as explicitly allowed in writing by ISM, you shall not copy, download, stream, capture, reproduce, duplicate, archive, upload, modify, translate, publish, broadcast, transmit, retransmit, distribute, perform, display, sell, or otherwise use any ISM PMI^® Content.

Except as explicitly and expressly permitted by ISM, you are strictly prohibited from creating works or materials (including but not limited to tables, charts, data streams, time-series variables, fonts, icons, link buttons, wallpaper, desktop themes, online postcards, montages, mashups and similar videos, greeting cards, and unlicensed merchandise) that derive from or are based on the ISM PMI^® Content. This prohibition applies regardless of whether the derivative works or materials are sold, bartered, or given away. You shall not either directly or through the use of any device, software, internet site, web-based service, or other means remove, alter, bypass, avoid, interfere with, or circumvent any copyright, trademark, or other proprietary notices marked on the Content or any digital rights management mechanism, device, or other content protection or access control measure associated with the Content including geo-filtering mechanisms. Without prior written authorization from ISM, you shall not build a business utilizing the Content, whether or not for profit.

You shall not create, recreate, distribute, incorporate in other work, or advertise an index of any portion of the Content unless you receive prior written authorization from ISM. Requests for permission to reproduce or distribute ISM PMI^® Content can be made by contacting in writing at: ISM Research, Institute for Supply Management, 309 West Elliot Road, Suite 113, Tempe, Arizona 85284-1556, or by emailing [email protected]; Subject: Content Request.

ISM shall not have any liability, duty, or obligation for or relating to the ISM PMI^® Content or other information contained herein, any errors, inaccuracies, omissions or delays in providing any ISM PMI^® Content or for any actions taken in reliance thereon. In no event shall ISM be liable for any special, incidental, or consequential damages arising out of the use of the ISM PMI^®. Report On Business^®, PMI^®, Manufacturing PMI^®, Services PMI^®, and Hospital PMI^® are registered trademarks of Institute for Supply Management^®. Institute for Supply Management^® and ISM^® are registered trademarks of Institute for Supply Management, Inc.

About Institute for Supply Management^® (ISM^®)
Institute for Supply Management^® (ISM^®) is the first and leading not-for-profit professional supply management organization worldwide. Its community of more than 50,000 in more than 100 countries around the world manage about US$1 trillion in corporate and government supply chain procurement annually. Founded in 1915 by practitioners, ISM is committed to advancing the strategy and practice of integrated, end-to-end supply chain management through leading edge data-driven resources, community, and education to empower individuals, create organizational value and to drive competitive advantage. ISM’s vision is to foster a prosperous, sustainable world. ISM empowers and leads the profession through the ISM^®PMI^® Reports (formerly Report On Business^®), its highly-regarded certification and training programs, corporate services, events and assessments. The ISM^® PMI^® Reports — Manufacturing and Services — are two of the most reliable economic indicators available, providing guidance to supply management professionals, economists, analysts, and government and business leaders. For more information, please visit: www.ismworld.org.

The full text version of the ISM^® Manufacturing PMI^® Reportis posted on ISM^®‘s website at www.ismrob.org on the first business day* of every month after 10:00 a.m. ET. The one exception is in January when the report is released on the second business day of the month.

The next ISM^® Manufacturing PMI^® Reportfeaturing October 2025 data will be released at 10:00 a.m. ET on Monday, November 3, 2025.

*Unless the New York Stock Exchange is closed.

SOURCE Institute for Supply Management